Category: Wastewater Lift Station

Lift stations also referred to as sewer pumping stations are a critical component in the overall collection of wastewater. Most wastewater collection systems can’t function without lift stations. They are facilities that move raw sewage from lower, usually underground, to higher elevations through a system of pipes. Generally, wastewater lift station in Houston are used when the elevation of the source is not sufficient for gravity flow, the use of gravity conveyance results in excessive excavation and high construction costs: basements are too low to discharge sewage in the main sewer; sewage must be conveyed over a ridge; the sewage must be raised to get gravity flow through a treatment plant; discharge outlets are below the level of the receiving body of water; an existing gravity system is not yet available. If you don’t work in water reclamation facilities or pollution control facilities, you might need a bit more clarification about what exactly makes lift stations so important. Let’s start with a quick breakdown of the components.

The Design

Lift stations are complex facilities, and they are more than one type. The key elements of wastewater lift stations include a wastewater receiving well, known as a wet well, a screen to separate coarse materials, pumps and pipes complete with valves, a power supply system, equipment control and alarm system, an odor control system, and a ventilation system. The wet well is also equipped with a level sensor that determines when the pump turns on and off. When the level rises to a predetermined point, a pump starts to lift the sewage upward through a pressurized pipe system. From there, it is discharged, and the cycle starts over until the sewage eventually reaches its final destination, which is usually a treatment plant.

Lift stations are also equipped with floor access hatches or openings above the pump room, an overhead monorail beam, bridge cane, and portable hoist for easy pump removal.

The Advantages

As mentioned earlier, the main purpose of wastewater lift stations in Houston is to reduce the overall cost of sewer system construction. Other advantages depend on the type of lift station being used. Dry-pit or well pumps are not fully submerged in wastewater, which makes troubleshooting problems much easier. Instead of shutting the station down and taking it out of the well for inspection, the issue can be easily diagnosed during operation. Dry-pit submersible pumps are highly resistant to flooding damage and have a compact design which is perfect where space is limited. Lastly, there are submersible pumps, which are the least expensive to construct because only a wet pit is needed. Overall, lift stations mean there is no direct contact with the wastewater and sewage can be pumped automatically to higher elevations.

The Disadvantages

Although there is a long list of pros associated with lift stations, there are also negatives. Wastewater lift stations in Houston require a significant amount of power, are expensive to upgrade, and because of potential noise and odors, they create public concerns. Although they can reduce the cost of construction, lift stations are also expensive to construct and maintain. Contact us today for further information.

Is your wastewater lift station in Houston struggling to do its job effectively? There are a number of problems that can occur as a result, so let’s take a quick look at how you can tell when it’s time to call in a professional.

But first things first—what is a wastewater lift station?

Wastewater lift stations in Houston (https://draneranger.com/services/wastewater-lift-station-houston/) are basically systems installed to move wastewater between different elevations—specifically from lower elevations to higher elevations (hence the term “lift”)—through a system of pipes. The systems are most often installed in an enclosed structure, called stations, and these come in two forms: the dry-pit or dry-well lift station, and the submersible lift station. The type of system you have will dictate how it needs to be serviced. Dry-well lift stations, for instance, house their pumps and valves in an easily accessible pump room, and the wet-well (which contains a screen to remove course materials, pumps and piping, motors, a power supply system, an equipment control and alarm system, and an odor control and ventilation system) is attached as a separate chamber. Most lift stations, whether custom-designed or prefabricated, usually feature equipment, like floor hatches or openings and a bridge crane or portable hoist, for easy pump removal.

How do you know when there’s a problem?

Wastewater lift stations in Houston are required to undergo frequent inspections for potential problems and to ensure they are functioning normally and efficiently. Warning signs that there is a problem could include:

• Unusual noises

• Vibration

• Heat

• Leakage or discharge

• Lower speed, suction, or pressure.

Of course, as with anything, preventative maintenance is key.

How often does your wastewater lift station need to be maintained?

This depends on the size and type of system. Typically, wastewater lift stations require weekly inspections to ensure everything is working correctly and to collect and properly dispose of any course materials collected by the grinder bar screens. Scrubber systems for odor control need to have their chemicals replenished every three months, but chemical feed stations should also be inspected weekly.

Why should you call in a professional to inspect and maintain your wastewater lift station?

The routine preventative maintenance of your wastewater lift station in Houston is a labor-intensive task, and it is extremely important when it comes to preventing costly repairs as a result of unnecessary equipment wear. It can also prevent system downtime, which can have other unfortunate repercussions (you don’t want those chemical scrubbers that were installed for odor control to experience any downtime, nor do you want too much course material to pile up before you arrange for safe and sanitary removal). It’s also important to remember that there are strict sewage control rules in Houston, and that means your wastewater lift station in Houston, whether on your property or at your business, needs to be regularly maintained to the highest standards.

Who should you contact for routine maintenance?

Ideally, the same professionals you would contact if you were experiencing a problem. You need someone you can call in a crunch as well as someone who can offer regular maintenance and repair of your lift station and the wet well inside, as well as safe disposal of sewage and other related materials. To avoid sewage issues now and in the future, contact Drane Ranger today.

Trust Experience

Wastewater lift stations transfer wastewater from lower altitudes to higher altitudes where the gradient of the area doesn’t allow for a natural flow. Lift stations are a critical aspect of properly disposing and storing sewage and wastewater to avoid contamination and the spread of illness or waste-borne pathogens.

If you’re looking to hire a wastewater lift station service provider in Houston, there are a few things you need to consider. Firstly, you’ll want to ensure that the service provider has experience in checking, cleaning, and pumping wet-wells as per schedule. Hiring an experienced wastewater lift station in Houston can significantly reduce the chances of a catastrophic and costly failure. Wastewater lift stations need to be regularly cleaned and maintained to avoid clogging, back-up, and overflow.

Hire a Team of Experts

When choosing a wastewater lift station in Houston, look for a service provider equipped with an experienced repair team. Lift stations require regular and proper inspection to ensure that every component of the lift station is working as it should. For example, valves need to be inspected every six months, and floats need to be assessed and cleaned at least four times a year to ensure that the wastewater lift station is functioning safely and efficiently. There are other components of a lift station that require regular inspection as well: the alarm system, ventilation tool, lights, switches, and associated accessories all need regular inspection to avoid major problems. A properly functioning alarm system will alert you to potential problems with the lift station immediately so that you can deal with any issues and avoid any fines or disruptions to your service.

Choose the Right Pump

One of the most important things to consider when choosing a wastewater lift station in Houston is determining the best pump for your needs. Pumps are designed to handle different conditions in different water types. These conditions may include the presence of suspended solids, viscosity, slurry, or clean water. The type of pump you’ll need will depend on whether you’re looking for a wastewater lift station for industrial or commercial purposes.

Before making any decisions, talk to various wastewater lift station service providers in Houston to determine which design is best for you. An experienced and professional provider will be able to guide you in all aspects of choosing the best lift station for your needs. They’ll also be able to promise consistent services to reduce the chances of any unwanted and expensive failures of the lift station. In the event that there are any disruptions or issues with the service, they’ll be able to immediately provide you with replacements of the required devices, including grinder pumps, effluent pumps, sewage pumps, or floats. Make sure you do your due diligence when hiring a wastewater lift station service provider in Houston, as a little bit of research can go a long way. A professional and trustworthy provider will have a licensed and experienced team of workers, technicians, inspectors, and supervisors at your disposal (no pun intended!).

What is a Lift Station?

Most homeowners or business owners don’t often think about wastewater lift stations until something goes wrong, but wastewater lift stations are crucial to the proper disposal and storage of sewage and wastewater.

A wastewater lift station is used to pump wastewater or sewage from a lower level to a higher level when the gradient of the area doesn’t allow for a natural flow. This is how it works:

Sewage is stored and fed into a pit and once it reaches a certain level electrical instruments will recognize that the pit is full and automatically activate the pump. When that happens, the sewage will be pumped out to its next destination. It’s a simple system, but if it’s not maintained properly, it can cause a lot of complex and costly issues.

The Elements of a Wastewater Lift Station

There are two main components of a wastewater lift station: the controls and the wet well. The controls do just that: control the lift station, acting as the “brains” of the station. The wet well is a basin where the wastewater is discharged. The wet well also holds the pumps for the lift station.

If you have a wastewater lift station for your Houston home or office, it’s important that you ensure it is maintained regularly to avoid any costly and time-consuming disruptions in its service. You want to prevent any clogging or back-ups, and ensure your wastewater lift station in Houston (https://draneranger.com/services/wastewater-lift-station-houston/) is regularly cleaned.

Why is Regular Maintenance Important?

The majority of wastewater lift stations are stored underground to prevent contagion and health risks. Sewage, after all, can release poisonous gases like methane and hydrogen sulfide into the atmosphere, and can also spread pathogens and diseases. It’s crucial for your health and for the health of others that sewage is always properly contained and disposed of, so it’s important that all sewage disposal systems are working and properly maintained to avoid the spread of diseases and harmful chemicals.

Consult a professional to take a look at your wastewater lift station in Houston to ensure that all the elements of the station are working as they should. You should also hire someone to ensure proper maintenance of your lift station on a regular basis. Proper maintenance of a lift station can save you a lot of headache and money in the future, as disruptions to sewage disposal systems can be very costly, stressful, and time-consuming. Wells need to be pumped out and cleaned to avoid clogging and build-up, valves need to be greased, and the lift station should be properly inspected and regularly cleaned to ensure optimal performance. A professional drain specialist will also check to see if all the electrical equipment is working properly.

Don’t wait until there’s a problem with your wastewater lift station before you talk to a drain specialist. Avoid the future hassle and financial cost by hiring a professional and experienced drain specialist to inspect and maintain your wastewater lift station in Houston. You’ll be happy you did.

Wastewater lift stations are the types of things that most people do not even think about until they need one. Yet these handy devices are integral for many small businesses in Texas. Essentially, they help wastewater move when gravity is against you, helping your business stay clean and within local regulations. If you are looking for a wastewater lift station in Houston, then here are a few tips to help you find the right one, and some advice on making sure it keeps running as efficiently as possible now and into the future.

1. Look at Wet Well Materials

Wastewater lift stations can be roughly divided into two parts: the wet well and the controls. The wet well itself is essentially a basin housing the inflow and pumps. For a wastewater lift station in Houston, the material will generally be fiberglass or concrete. Some are metal but these are increasingly rare because of their malleability and cost, especially compared to fiberglass.

2. Think about Design and Controls

While most wastewater lift stations run on their own, it is always important to consider the design and controls of the device. For the controls, you will need to think about ease of use. Are the controls simple and easy to decipher? If you needed to, could you shut it down or make adjustments as necessary? Look for a device that makes operation easy so that you can take control when necessary.

3. Connect with a Qualified Lift Station Maintenance Company

If you own a wastewater lift station in Houston, then it will require maintenance every once and awhile. This can be anything from routine check-ups and tune-ups to actual full repairs on broken stations. Since lift stations are actually quite complicated devices, it is best to leave these sorts of jobs to professional companies like Drane Ranger. Since we have the experience and tools necessary to keep lift stations working at their absolute best, we can make sure that your lift station is working as efficiently as possible, and for longer.

4. Make Sure Your Lift Station Gets Regular Cleanings

Lift station cleaning is one of the most important aspects of many local businesses. Without regular cleanings, your lift station can actually be vulnerable to costly repairs, which is why so many companies choose to have regular, scheduled lift station cleanings through an experienced and professional company. For people with a wastewater lift station in Houston, many choose Drane Ranger. We can make lift station cleaning easy and effortless, coming at regular intervals to ensure that your lift station is clean and working as efficiently as possible.

If you have or need a wastewater lift station in Houston, then be sure to contact Drane Ranger. Our maintenance packages and repair services can ensure that your lift station works for years to come. Without the right services for your lift station, you could end up paying more in costly repairs, plus the fact that a dirty lift station will work much less efficiently. Click this link for more information.

Are you looking for a wastewater lift station in Houston? If you are, we have some tips for finding a company to help keep your plumbing and sewage disposal system working around the clock. It can become a nightmare quickly when a lift station is down. If it’s a bad situation it can even make it to the evening news; and no commercial or industrial business wants to take responsibility for such a mess.

Hiring an experienced wastewater lift station in Houston to support you can greatly reduce the chances of a catastrophic failure. For those of you who don’t know how they work, we’ll begin with a brief description:

Sewer systems go into a central collection point (lift station). The basin is usually made of fiberglass or concrete and is kept in a hole in the ground. The second part of a lift station is the wet-well controls. The sewage flow is discharged into the basin where the wet-well is.

The wet-well has one or two pumps and its function is to pump the fluids into a downstream point which is either another lift station or a treatment plant. A company that maintains a wastewater lift station in Houston must be an expert at what they do.

Knowing this information and the benefits of a lift station will help you find the best wastewater lift station in Houston.

Tips to Finding a Wastewater Station in Houston

The main benefit of a lift station is that it’s easy to take care of, thus there are less opportunities for something to go wrong. There are three main roles of a company that cleans and keeps it running smoothly.

Wet-Wells Inside Maintenance – Wastewater Lift Station in Houston

When a wet-well isn’t kept properly a number of problems can ensue, such as sewer infrastructure damage, backups or environmental spills. It’s important that they are checked and cleaned regularly.

Lift Station Repair – Wastewater Lift Station in Houston

When a lift station breaks the consequences range from standing water, to unpleasant odors and serious health or environmental issues. Help from an expert is crucial if the plumbing relies on the sewage lift station.

Safe Disposal of Sewage Materials – Wastewater Lift Station in Houston

When sewage materials are sent to a disposal site via a pump, it’s important that the pump is working properly at all times. This is another job of a maintenance company.

Each wastewater lift station in Houston has unique features that must be accounted for. Some aspects will affect the operation, others may affect required safety procedures. A wet-well hazard assessment should be done before installation. Proper planning ties into the water, timing, safety, and disposal aspects to make sure the maintenance and cleaning are done as safely and efficiently as possible.

If you’re looking for a wastewater lift station in Houston, we can help. You can call us to make scheduled visits to your property to inspect and maintain your sewage system. For more information you can visit our website.